Basic Info.
Certification
SGS, ISO 9001:2000, ISO 9001:2008, CE, UL
Automation
Semi-Automatic
Suitable for
Aluminum, Carbon Steel, Stainless Steel
Type
Hydraulic Bending Machine
Transport Package
Plastic Film Wrapping
Specification
length: 3300mm; width: 2000mm; height: 2550mm
Product Description
1,The performance and Characteristics of the equipment
The machine adopts steel plate welded frame, high strength and rigidity. After annealing, stress relief, overall processing. Ensure that the machine precision. The machine adopts hydraulic transmission, and use of Italy ATOS world brand hydraulic system, according to customer demand to other optional hydraulic system.
The machine equips with Nanjing Eston digital readout system T10. The machine is divided into X-axis and Y-axis, X-axis shows the back guage front-back movement size, Y-axis is the display the size of slider up and down movement, T10 system displays the X-axis and Y-axis,the position accuracy can reach to 0.01 mm. If there is a gap in the thread again, the system can be automatically compensated. System with password protection, anyone who wants to change the parameters you need to enter the correct password, otherwise only read parameter.
(1)Frame
The left and right columns, tables, tanks, rail, fuel tanks and other fixed plate welded into a box-shaped frame, and then after aging vibration, stress relief annealing, the whole process to ensure accuracy.
(2)Slider and Slider Motion
Welded steel plate from the slider, cylinder connecting the left and right ends of the left and right there are two rails, mold installed below the slider driven by a hydraulic cylinder piston rod to form a slider up and down movement and a limit switch, upper and lower limits bit protected, to ensure the accuracy of bending, the precise location of the lowest point of the slider is provided a mechanical stop, encoder signal to control the rotation conveying digital display table display by the Y-axis control.
(3)Synchronization mechanism:
To ensure the synchronous movement of the machine slide up and down both ends, using a synchronous torsion bar and rod, with a synchronized axis deviation up and down movement to ensure that both ends of the torsion bar of the machine can be adjusted with a certain accuracy of synchronization, thereby correcting the slip parallelism between the block and the work surface.
(4)Hydraulic system:
Hydraulic System Italy ATOS and Schneider electrical components, main motors, pumps, valves, etc. mounted on the fuel tank, tubing is a high-precision, tubing joints using advanced card sets of joints, the use of advanced hydraulic control valve to ensure fast, the slow down the commutation travel freely, to save energy. In order to adjust the pressure at any time, in the right column of the machine installed remote relief valve and pressure gauge, easy to adjust the pressure of the machine. As shown below:
(5)Electrical:
Machine hanging analogy operation, and equipped with electrical protection, electrical box to ensure that when you open the door, automatically cut off power to protect the personal safety. In the right column machines installed rotating operating machinery. Equipment jog, single, continuous three working specifications can be provided on the front wall of the station and the manipulation button foot switch operation. Electrical box installed in the right column, the main electrical components adopt Schneider. As shown below
(6)The device continuously operating environment:
(1) Power range: Three-phase AC 380V ± 10% 50HZ;
(2) Ambient temperature: -10 ºC -45 ºC;
(3) Relative humidity: 20 ~ 80% RH.
(4) Altitude: ≤2500m.
(5) away from the vibration source and strong electromagnetic interference sources.
(6) non-hazardous and corrosive gases, no dust
2.Main technical data:
(1)Display--TE10
(2) Main motor--Made in China(Jiangsu WeiTE)
(3) Hydraulic system--ATOS(Italy)
(4) Main electrical elements--Schneider(Germany)
(5) Standard dies--Shanghai(China)
(6) Pump--Shanghai(China)
(7) Seal--NOK(Japan)
3.Main technical data:
No. | name | unit | value |
1 | Nominal Force | KN | 1000 |
2 | Length of worktable | mm | 3200 |
3 | length of walls | mm | 2600 |
4 | Ram stroke | mm | 120 |
5 | Distance of back guage | mm | 600 |
6 | Opening height | mm | 375 |
7 | Depth of throat | mm | 320 |
8 | Width of worktable | mm | 200 |
9 | Height of worktable | mm | 850 |
10 | The running speed of ram | No load | mm/s | 65 |
Full-load | mm/s | 9 |
return | mm/s | 65 |
11 | Main motor | kW | 7.5 |
12 | Pump | L | 20 |
13 | dimension | mm | 3700x1400x2450 |
14 | Net weight | kgs | 7000 |
4,List of accessories parts
No. | Name | Quantity | remark |
1 | Pedal switch | 1 piece | |
2 | Front support | 2 pieces | |
3 | foundation bolts | 4 pieces | |
4 | Spring washer | 4 pieces | |
5 | Nut | 4 pieces | |
5,list of technical documents
No. | Name | quantity |
1 | Operation manual (hydraulic system) | 1 piece |
2 | Operation manual( programme and operation parts) | 1 piece |
3 | Electrical principle drawing | 1 piece |
4 | Hydraulic principle drawing | 1 piece |
5 | Foundation drawing | 1 piece |
6 | Certification of quality,packing list | 1 piece |
6,Delivery
30 working days after received 30% in advance
7,Guarantee
14 months from the date of delivery
8,Payment,
30% in advance, balance before shipment
9,details
contact information:
Jennifer Li(0086-15962741521)
Jiangsu Yalian Machine Manufacturing Co., Ltd.,
No. 6 Nanxin Road,Economic and Technological Development Zone,Hai'an City,Jiangsu Province,China
TEL:0513-81812518,FAX:0513-81815429
Address:
No. 6, Nanxin Road, Economic and Technological Development Zone, Haian City, Jiangsu Province, Nantong, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Jiangsu Yalian Machine Tool Manufacturing Co., Ltd. is the special manufacturer with the whole line of scientific research, development, manufacturing and selling of shearing, bending and rolling machines, and specializes in manufacturing of products of more than 300 specifications, such as QC11Y, QC11K, QC12Y, QC12K series plate shearing machines and WC67Y, WC67K, WE67K series bending machines, as well as roll universal sheet bending machine, hydraulic rolling machine, profile bender, hydraulic press, the uncoiling level line. The products of the company are sold throughout the country and have been exported to the countries and regions in Southeast Asia, Europe and America, the Middle East, etc.
The company is committed to research and development of the machines and development of products having broad scope of application and excellent market development prospect while absorbing the domestic and overseas advanced manufacturing technologies fully. The company is deemed as the leader in the industry at home and abroad due to novel structure of product produced, unique process, advanced manufacturing technologies and outstanding performance.