1,The performance and Characteristics of the equipment
The machine adopts steel plate welded frame, high strength and rigidity. After annealing, stress relief, overall processing. Ensure that the machine precision. The machine adopts hydraulic transmission, and use of Italy ATOS world brand hydraulic system, according to customer demand to other optional hydraulic system.
The machine adopts DA52s CNC system from Nanjing ESTUN. The machine is divided into X-axis and Y-axis, X-axis control, display and positioning of back gauge position, Y-axis control, display and positioning the slider moves up and down position (to control the angle size). Unilateral two-way position, effectively eliminating the spindle clearance. DA52s CNC system, to ensure that work on the basis of accuracy, the cost of the product is significantly reduced.
(1)Frame
The left and right columns, tables, tanks, rail, fuel tanks and other fixed plate welded into a box-shaped frame, and then after aging vibration, stress relief annealing, the whole process to ensure accuracy.
(2)Slider and Slider Motion
Welded steel plate from the slider, cylinder connecting the left and right ends of the left and right there are two rails, mold installed below the slider driven by a hydraulic cylinder piston rod to form a slider up and down movement and a limit switch, upper and lower limits bit protected, to ensure the accuracy of bending, the precise location of the lowest point of the slider is provided a mechanical stop, encoder signal to control the rotation conveying digital display table display by the Y-axis control.
(3)Synchronization mechanism:
To ensure the synchronous movement of the machine slide up and down both ends, using a synchronous torsion bar and rod, with a synchronized axis deviation up and down movement to ensure that both ends of the torsion bar of the machine can be adjusted with a certain accuracy of synchronization, thereby correcting the slip parallelism between the block and the work surface.
(4)Hydraulic system:
Hydraulic System Italy ATOS and Schneider electrical components, main motors, pumps, valves, etc. mounted on the fuel tank, tubing is a high-precision, tubing joints using advanced card sets of joints, the use of advanced hydraulic control valve to ensure fast, the slow down the commutation travel freely, to save energy. In order to adjust the pressure at any time, in the right column of the machine installed remote relief valve and pressure gauge, easy to adjust the pressure of the machine. As shown below:
(5)Electrical:
Machine hanging analogy operation, and equipped with electrical protection, electrical box to ensure that when you open the door, automatically cut off power to protect the personal safety. In the right column machines installed rotating operating machinery. Equipment jog, single, continuous three working specifications can be provided on the front wall of the station and the manipulation button foot switch operation. Electrical box installed in the right column, the main electrical components adopt Schneider. As shown below
(6)The device continuously operating environment:
(1) Power range: Three-phase AC 380V ± 10% 50HZ;
(2) Ambient temperature: -10 ºC -45 ºC;
(3) Relative humidity: 20 ~ 80% RH.
(4) Altitude: ≤2500m.
(5) away from the vibration source and strong electromagnetic interference sources.
(6) non-hazardous and corrosive gases, no dust
2.Main technical data:
(1)Display--TE10
(2) Main motor--Made in China(Jiangsu WeiTE)
(3) Hydraulic system--ATOS(Italy)
(4) Main electrical elements--Schneider(Germany)
(5) Standard dies--Shanghai(China)
(6) Pump--Shanghai(China)
(7) Seal--NOK(Japan)
3.Main technical data:
| No. | name | unit | value |
| 1 | Nominal Force | KN | 1000 |
| 2 | Length of worktable | mm | 3200 |
| 3 | length of walls | mm | 2600 |
| 4 | Ram stroke | mm | 120 |
| 5 | Distance of back guage | mm | 600 |
| 6 | Opening height | mm | 375 |
| 7 | Depth of throat | mm | 320 |
| 8 | Width of worktable | mm | 200 |
| 9 | Height of worktable | mm | 850 |
| 10 | The running speed of ram | No load | mm/s | 65 |
| Full-load | mm/s | 9 |
| return | mm/s | 65 |
| 11 | Main motor | kW | 7.5 |
| 12 | Pump | L | 20 |
| 13 | dimension | mm | 3700x1400x2450 |
| 14 | Net weight | kgs | 7000 |
4,List of accessories parts
| No. | Name | Quantity | remark |
| 1 | Pedal switch | 1 piece | |
| 2 | Front support | 2 pieces | |
| 3 | foundation bolts | 4 pieces | |
| 4 | Spring washer | 4 pieces | |
| 5 | Nut | 4 pieces | |
5,list of technical documents
| No. | Name | quantity |
| 1 | Operation manual (hydraulic system) | 1 piece |
| 2 | Operation manual( programme and operation parts) | 1 piece |
| 3 | Electrical principle drawing | 1 piece |
| 4 | Hydraulic principle drawing | 1 piece |
| 5 | Foundation drawing | 1 piece |
| 6 | Certification of quality,packing list | 1 piece |
6,Delivery
30 working days after received 30% in advance
7,Guarantee
14 months from the date of delivery
8,Payment,
30% in advance, balance before shipment
9,details
contact information:
Jennifer Li(0086-15962741521)
Jiangsu Yalian Machine Manufacturing Co., Ltd.,
No. 6 Nanxin Road,Economic and Technological Development Zone,Hai'an City,Jiangsu Province,China
TEL:0513-81812518,FAX:0513-81815429
){kind=link}